The Universal Zebra System (UZ-1) is The Most Versatile Weapon In Your Arsenal Against ECM Motor Problems. . .

The secret to this tool's flexibility is ADAPTERS. These low-cost adapters simply plug in to the end of the Universal Zebra's harness, and adapt the tool to virtually all ECM motors used in the HVAC-R Industry.

Diagnosing which section of an ECM motor that has a problem has never been easier.
The SideWinder is easy to use! Using the tool's first test, by rotating the motor shaft, causes the motor to generate a back-EMF voltage, which is displayed by the phase LEDs. Comparing the brightness of these LEDs shows how the three phases are working. The second test checks for any shorts or grounds between any of the windings and motor frame. The 3 LEDs display any faults.

The ZebraStat is a fully electronic, easy-to-use diagnostic tool for all HVAC and refrigeration system technicians. Inside its durable protective case you will find a tool that quickly diagnoses low-voltage control problems in system wiring, control boards, thermostats, and associated components.

The VZ-7 is a microprocessor-controlled diagnostic tool that performs sophisticated testing with only 4 switches. With it, a Tech will be able to:

• Visually monitor signal calls from the furnace/air handler circuit boards.
• Interrupt those signals and send the motor any signals you desire, to observe motor operation.
• Get a visual display of motor RPM and the calculated CFM (on most systems).
• Get a visual readout of all 4 system "taps". These selections help set up a system correctly.
• Get a direct readout of the control voltage in the motor (low voltage here causes erratic operation).
• And finally, IF a problem is traced to the motor, one switch press starts an automatic analysis to clearly indicate if the problem is in the motor's electronics, or one of 7 possible winding problems.

Easy to use, quick to install, plug-In transient, surge, lightning, & spike protection for ECM Motors

Plug-In transient, surge, lightning, & spike protection for X-13 and Evergreen Type ECM motors. To use, simply plug X13PR into motor, then plug motor's harness into the X13PR... (Full instructions in package.)

Plug-In transient, surge, lightning, & spike protection for 120-240 Volt condensing units and furnaces. To use, simply plug ZAP-PRO directly into contactor or circuit board, then attach ground strap. (Find Full Instructions here or by Following QR Code on Packaging.)

Flyer for the SideWinder, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Flyer for The Universal Zebra System, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Flyer for ZebraStat, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Flyer for Variable Speed Zebra, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Flyer for Variable Speed Motor Protectors, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Flyer for ZAP-PRO Surge and Spike Protectors, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Motor Compatibility Chart Flyer, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Zebra Connector Flyer, Full-color flyers that you may imprint with your Distributor information. These flyers are sent at no charge with your order of any other Zebra Products.

Full color information Zebra Instruments Tri-Fold Flyer